Old School vs New School Hitting Instruction - Which Is Better? - Coach...

(707) 290-9731
777-D Elmira Road
Vacaville, CA 95687
Website

Baseballs, Did You Know?

Cushioned wood cores were patented in the late 19th century by sports equipment manufacturer Spalding, the company founded by former baseball star A.G. Spalding. In recent years, various synthetic materials have been used to create baseballs; however, they are generally considered lower quality, stitched with two red thick thread, and are not used in the major leagues. Using different types of materials affects the performance of the baseball. Generally a tighter-wound baseball will leave the bat faster, and fly farther. Since the baseballs used today are wound tighter than in previous years, notably the dead-ball era that prevailed through 1920, people often say the ball is "juiced". The height of the seams also affects how well a pitcher can pitch.

Baseballs used in MLB and the top minor leagues (AAA) are made to the same specifications, but labelled separately. Balls used in the lower minor leagues (up to AA) use slightly different specifications intended to make those balls somewhat more durable, although MLB pitchers on rehab assignments in the minors are usually supplied with major league-grade balls. Generally, in Little League through college leagues, the seams are markedly higher than balls used in professional leagues.

Baseballs cost three dollars each in 1900, a unit price which would be equal to $98 today. Due to their high relative cost, club owners in the early 20th century were reluctant to spend much money on new balls if not necessary. It was not unusual for a single baseball to last an entire game, nor for a baseball to be reused for the next game especially if it was still in relatively good condition as would likely be the case for a ball introduced late in the game. Balls hit into the stands were retrieved by team employees in order to be put back in play, as is still done today in some other sports. Over the course of a game, a typical ball would become discolored due to dirt, and often tobacco juice and other materials applied by players; damage would also occur, causing slight rips and seam bursts. This would lower the offense during the games giving pitchers an advantage. However, after the 1920 death of batter Ray Chapman after being hit in the head by a pitch, perhaps due to his difficulty in seeing the ball during twilight, an effort was made to replace dirty or worn baseballs. However, some rules intended solely to reduce the frequency (and associated expense) with which balls need to be replaced during a game remain in force - the Pine Tar Incident in the 1980s was one famous occurrence directly resulting from the enforcement of such a rule.

Today, MLB teams are required to have a minimum of 156 baseballs ready for use in each game. When combined with baseballs needed for practice, etc. each MLB team uses tens of thousands of balls every season. However, modern professional-grade baseballs purchased in bulk as is the case with professional teams only cost about seven dollars each as of 2023 and thus make up a negligible portion of a modern MLB team's operating budget. Recreational-grade baseballs can be purchased by the public for an even lower unit price.

Read more, here.

(707) 290-9731
777-D Elmira Road
Vacaville, CA 95687
Website

History of the Baseball

In the early, mid-1800s days of baseball, there was a great variety in the size, shape, weight, and manufacturing of baseballs. Early baseballs were made from a rubber core from old, melted shoes, wrapped in yarn and leather. Fish eyes were also used as cores in some places. Pitchers usually made their own balls, which were used throughout the game, softening and coming unraveled as the game went on. One of the more popular earlier ball designs was the "lemon peel ball," named after its distinct four lines of stitching design. Lemon peel balls were darker, smaller, and weighed less than other baseballs, prompting them to travel further and bounce higher, causing very high-scoring games.

In the mid-1850s, teams in and around New York met in an attempt to standardize the baseball. They decided to regulate the weight of baseballs at 51⁄2–6 oz, and with a circumference of 8–11 inches. There were still many variations of baseballs since they were completely handmade. Balls with more rubber and a tighter winding went further and faster (known as "live balls"), and balls with less rubber and a looser winding (known as "dead balls") did not travel as far or fast. This is generally true for all baseballs. Teams often used this knowledge to their advantage, as players from the team usually manufactured their own baseballs to use in games.

There is no agreement on who invented the commonplace figure-8 stitching on baseballs. Some historians say it was invented by Ellis Drake, a shoemaker's son, to make the cover stronger and more durable. Others say it was invented by Colonel William A. Cutler and sold to William Harwood in 1858. Harwood built the nation's first baseball factory in Natick, Massachusetts, and was the first to popularize and mass-produce baseballs with the figure-8 design.

In 1876, the National League (NL) was created, and standard rules and regulations were put in place. A.G. Spalding, a well-known baseball pitcher who made his own balls, convinced the NL to adopt his ball as the official baseball for the NL. It remained that way for a century.

In 1910, the cork-core ball was introduced. They outlasted rubber core baseballs; and for the first few years they were used, balls were hit farther and faster than rubber core balls. It eventually went back to normal. Pitchers adapted with the use of the spitball, which is now illegal, and an emphasis on changing the ball.

In 1920, a couple of important changes were made to baseballs. They began to be made using machine winders and a higher grade of yarn from Australia. Although there was no evidence that these balls impacted the game, offensive statistics rose throughout the 1920s, and players and fans alike believed the new balls helped batters hit the ball farther.

In 1925, Milton Reach patented his "cushion cork" center. It was a cork core surrounded by black rubber, then another layer of red rubber.

In 1934, The National League and American League came to a compromise and standardized the baseball. They agreed on a cushion cork center; two wrappings of yarn; a special rubber cement coating; two more wrappings of yarn; and, finally, a horsehide cover.

Baseballs have gone through only a few small changes since the compromise. During World War II, the United States banned the use of rubber for non war-related goods, including for baseballs. So in 1943, instead of using rubber, baseballs were made with rubber-like shells of balata (also used in golf balls), which is obtained from a particular type of tropical tree. Hitting declined significantly that year.

The introduction of synthetic rubber in 1944 resulted in baseballs' returning to normal. Offense would return to normal after the change back to the regular ball and return of players from active duty.

In 1974, due to a shortage of the material, horsehide was replaced by the more abundant cowhide as the cover material.

In 1976, MLB ended its relationship with Spalding for manufacturing their baseballs and switched to Rawlings, which still provides the balls to MLB today.

A significant increase in the number of home runs since the start of the 2016 baseball season caused MLB officials to establish a committee that would examine the manufacturing process. In December 2019, MLB officials said that a lower stitching seam profile had most likely led to the increase in home runs, but also pledged to consider studying the issue. On February 5, 2021, MLB issued a memo that said that Rawlings had altered their manufacturing process to reduce the bounce in the balls and that after extensive testing, "... we are comfortable that these baseballs meet all of our performance specifications." The same memo also noted that more teams had applied for permission to use humidors to store their baseballs. As of 2020 only the Arizona Diamondbacks, Boston Red Sox, Colorado Rockies, and Seattle Mariners, were using the devices.

Read more, here.

(707) 290-9731
777-D Elmira Road
Vacaville, CA 95687
Website

Baseball vs Softball Swing - Are they the same? - Coach Rich Lovell Expl...

Coach Rich talks about how the baseball vs softball swing are essentially the same.

(707) 290-9731
777-D Elmira Road
Vacaville, CA 95687
Website

The Baseball

A baseball is a ball used in the sport of the same name. The ball consists of a rubber or cork center wrapped in yarn and covered with white natural horsehide or cowhide, or a synthetic composite leather. A regulation baseball is 9 to 9¼ inches (229 to 235 mm) in circumference i.e. 2.86 to 2.94 inches (72.9 to 74.8 mm) in diameter, with a weight of 5 to 5¼ oz. (142 to 149 g). A baseball is bound together by 108 hand-woven stitches through the cowhide leather.

The leather cover is commonly formed from two saddle-shaped pieces stitched together, typically with red-dyed thread. That stitching plays a significant role in the trajectory of a thrown baseball due to the drag caused by the interaction between the stitching and the air. Controlling the orientation of the stitches and the speed of the ball's rotation allows a pitcher to affect the behavior of the pitched ball in specific ways. Commonly employed pitches include the curveball, the slider, the two-seam fastball, the four-seam fastball, the sinker, the cutter and the changeup.

Read more, here.

(707) 290-9731
777-D Elmira Road
Vacaville, CA 95687
Website

History of the Doughnut.

The doughnut was created by former New York Yankees catcher Elston Howard. Howard, in 1955, was the first African-American player on the Yankees' roster. He played catcher and the outfield during his time with the Yankees. The first team to invest in Howard's product was the St. Louis Cardinals. This essentially got players out of the habit of swinging multiple bats to warm up. While Howard is credited with inventing the doughnut, he did not make the amount of money he had hoped due to other companies making their own versions of the batting doughnut. Howard and his supporters did not have the funds to take the companies to court. During a game a doughnut usually is in the on-deck circle. The player in the on-deck circle normally swings a bat and stretches to prepare for their at-bat. The different doughnuts weigh varying amounts. The doughnut is discarded in the on-deck circle when the player moves into the batter's box. The weight was later dubbed the "doughnut" and the "iron doughnut".

Read more, here.

(707) 290-9731
777-D Elmira Road
Vacaville, CA 95687
Website

How To Hit A Curve Ball - Coach Rich Lovell - Baseball Barn

Coach Rich talks about the alluring secret to hitting a curve ball.

(707) 290-9731
777-D Elmira Road
Vacaville, CA 95687
Website

There are Doughnuts in Baseball?

A baseball doughnut is a weighted ring that fits over the end of a baseball bat, used for warming up during a baseball game. A doughnut is thought to help increase bat speed. Doughnuts can weigh as little as 4 oz. and as much as 28 oz. Players feel baseball doughnuts increase bat velocity because after warming up with a baseball doughnut then decreasing the weight after taking the doughnut off, the swing feels faster. The heavier load of the weighted bat stimulates the neural system and increases muscle activation during lighter bat swings. Researchers have found that muscle contractions are stronger after reaching near maximal loads. One research study also found that additional weight added to the bat may strengthen the muscles of the forearms and wrists. Baseball doughnuts are based on the theory of complex training, which alternates the use of heavier and lighter weights to increase explosive power. By increasing the number of motor units recruited, this training increases muscle performance.

Read more, here.

(707) 290-9731
777-D Elmira Road
Vacaville, CA 95687
Website

Care and Maintenance of Your Baseball Bat

Players can be very particular about their bats. Ted Williams cleaned his bats with alcohol every night and periodically took them to the post office to weigh them. "Bats pick up condensation and dirt lying around on the ground," he wrote, "They can gain an ounce or more in a surprisingly short time." Ichiro Suzuki also took great care that his bats did not accumulate moisture and thus gain weight: he stored his bats in humidors, one in the club house and another, a portable one, for the road. Rod Carew fought moisture by storing his bats in a box full of sawdust in the warmest part of his house. "The sawdust acts as a buffer between the bats and the environment," he explained, "absorbing any moisture before it can seep into the wood."

Many players "bone" their bats, meaning that before games, they rub their bats repeatedly with a hard object, believing this closes the pores on the wood and hardens the bat. Animal bones are a popular boning material, but rolling pins, soda bottles and the edge of a porcelain sink have also been used. Pete Rose had his own way of hardening his bats: he soaked them in a tub of motor oil in his basement then hung them up to dry.

Read more, here.

(707) 290-9731
777-D Elmira Road
Vacaville, CA 95687
Website

Should A Hitter Build A Stride Into Their Swing? - Coach Rich Lovell - ...

Coach Rich explains if a stride should be integrated into a swing for more power.

(707) 290-9731
777-D Elmira Road
Vacaville, CA 95687
Website